Tips and common problems for using glass glue scraper (scraper)
Time:2024-07-10
Views:141
Usage of manual glass glue scraper
1. Install the rubber scraper blade into the handle, lock it tightly, and ensure that the blade/scraper is secure.
2. Place the shovel/scraper perpendicular to the surface where the adhesive needs to be cleaned, adjust the appropriate angle, and observe for any foreign objects, metal protrusions, or obstacles.
3. Push the glue scraper (glue scraper) forward with steady force, scrape off the glue and residue, pay attention to the magnitude of the force, avoid shaking and scratching left and right to avoid damaging the surface.
4. When scraping off the rubber strip, if it is not cleaned completely at once, you can follow the above method, stick it tightly to the working surface, and then operate to achieve better cleaning effect.
5. After use, clean the blade and scraper handle with alcohol, and if possible, apply rust proof oil for safe storage.
Precautions for using a glass glue scraper (scraper)
1.When using a glass glue scraper, the blade should not touch other hard objects on the surface to avoid affecting the service life of the scraper blade.
2. When using a glass glue scraper, avoid using too much force to prevent the blade from damaging the surface.
3. When removing harder glue, you can choose a harder glue scraper (glue scraper); When scraping off softer glue, you can choose an elastic blade with lower hardness.
When using a glass glue scraper to remove glue, other auxiliary tools such as cleaning agents, brushes, etc. can be used to improve the cleaning effect.
5. During the use of the glass adhesive scraper, pay attention to safety protection to avoid scratching hands or jumping up and scratching the human body when the scraper blade is damaged.
DRMFG
ChatNow